LEDtronics announces the release of its new DC-to-DC Dimmer for LED lighting products.
It makes it possible to dim all 5-40V DC LED products such as LED strip lights,
LED bulbs, and LED floodlights. Since LEDs draw much less current than traditional
incandescent bulbs one had to buy a special high-end electronic dimmer to control
the desired light levels for their LED lighting application.
The LED dimming range is 0-100% of input. Input voltage can be any DC Voltage
between 5-40V DC. Dimmer output voltage is continuously adjustable between zero
and full-on. LED dimmers operate on minimal no-load current (10-15mA). Power
dissipation of the LED dimmer's drive circuitry is less than 0.7WW. No extra
load is added to the lighting circuit; the current draw is only 10-15mA. The
dimmer is not intended for use with inductive devices such as motors, etc.
No special configuration is needed. The LED simmer can drive up to 2,000 standard
white discrete LEDs or 50 high-flux LEDs. One unit can dim the supplied power
for an entire lighting channel or up to 2A, 24W maximum of LED bulbs, floodlights,
tube lights, and light strips. The LED dimmer can be used with 12V DC solar
power systems or connect directly to 120V AC-to-12V DC transformers. The size
is 2.3" long by 1.9" wide by 1.1" high (excluding knob).
For additional information contact LEDtronics toll free at 1-800-579-4875,
telephone 310-534-1505, fax at 310-534-1424, click here to email us
or mail at LEDtronics Inc., 23105 Kashiwa Court, Torrance, CA 90505. Visit our website at www.LEDtronics.com.
Read the product datasheet online at: DIMMER
