Home > LED Street Lights > LED Outdoor Area Flood Light, Wall Pack Fixtures > LED Outdoor Flood Lights, Spot & Medium Flood

LED Outdoor Flood Lights, Spot & Flood
Only 14 Watts, Swivel & Adjustable


12Vdc to 14Vdc — Up-Lights — Down-Lights — Parks — Landscape — Walkways


Ideal for use with Alternative or Renewable Energy Resources like Solar & Wind Power

Major Reduction in Energy Use, Reduces Light Pollution, "Dark Skies" Initiative Friendly
 
Meets Buy American requirements within the ARRA
American Reinvestment and Recovery Act
Energy Savings
GDL002-200-TPW-014M
Est.
Annual
Savings		$89
1 Lamp
   
  • Products on this page are
    Made In USA
    from imported parts
  • 3 Year Warranty
  • INSTALL INSTRUCTIONS
  • ETL
  • ISO 9001

  • Input Voltage: 12-14 VDC
  • Housing Material: Bronze-Colored Die-Cast Aluminum
  • Lens: Tempered Glass
  • Ambient Operating Temp. Range: ~-22°F to ~+122°F [~-30°C to ~+50°C]
  • Weight: 2.769 lb [1.256 kg]

  • Warranty: 3 Years
  • Low Power Consumption, High Intensity
  • Long Life: Lumen maintenance of the white LEDs is greater than 70% at 35,000 hours of operation.
    (Rated average life based on engineering testing and probability analysis)
  • Glare-Free Design Enhances Night Vision
  • Optimally Designed to Maximize Path Illumination
  • Rugged, Industry-Standard Fixture: Bronze-Colored Die-Cast Aluminum Housing; Tempered-Glass Lens
  • Solid-State: High-Shock & High- Vibration Resistant
  • Weather-Proof: Water-Resistant for Outdoor Applications
  • Adjustable: Fits any Angle
  • Safety Assurance: C/UL-Listed

For qualified applications and large quantity orders:
  • Custom LED Colors: Other White-Color Temperatures and Colors
  • Special Voltages: 24/28V
  • Higher or Lower Intensity
  • Other LED Beam Angles for Different Effects
  • Infrared (IR) LEDs in 730nm, 850nm, 880nm, 940nm

  • Landscape Lighting
  • Walkway Lighting
  • Amusement Park Lighting
  • Architectural Wall Washing
  • Illuminate Signs
  • Illuminate Pathways
  • Illuminate Recreation Areas
  • Emergency Exit-Way Lighting

  • Major Energy Savings: Over 90% Compared to Incandescents
  • Reduces Light Pollution/Glare: “Dark Skies Initiative”-Friendly, No Disability Glare
  • Even Lighting: High Intensity / No Halation
  • Cool Operation: Never Gets Hot to the Touch – Less Fire Hazard
  • Safe Low-Voltage Operation
  • Digitally Controllable / Low Maintenance
  • Eco-Friendly: No Mercury Content, No Lead
  • No Hazardous Emissions: No UV or IR Radiation–Does Not Attract Insects; No RF Interference

LEDtronics, Inc.® 
The Future of Light
Low Voltage Landscape Lighting Luminaire
Model No. GDL002-200-xxW-014x
Voltage 12-14V
Lamp Type LED
Lamp Wattage 12W

C-UL US Listing Mark

21TS

Lamp Replacement –  
Use LED 12-14V LED Type 12 Watts Max.
LEDtronics, Inc®. Replacement Part Number – GDL002-xxW-014x
This unit not for use with submersible fixture. 
Use only with low voltage landscape power units. 
Do not exceed 25A, 15V.
Do not install within 10 ft. of spa, pool or fountain.
Website: www.ledtronics.com

Optional Power Source Connection:
 Regulated ± 5 Power Transformers		 The following assumes the user's competent knowledge of electrical wiring and insulation, and all cutting and splicing is done with power disconnected. Wire leads that need to be cut while attached to a power supply will be separated and individually cut to avoid any residual current lurking in the power supply. The 12/14Vdc FloodLED Floodlight has raw wire red Positive and black Negative leads to be spliced onto a 12/14Vdc power supply with Positive wire leads and Negative wire leads using wiring nuts, if preferred. Power jacks attached to power supplies can be cut off, and the wires stripped of insulation for splicing. To easily connect or disconnect the Floodlamp using power jacks, a female powerjack like ADPT-STP-002 will have to be spliced onto the Floodlight's leads, positive wire to positive wire, negative wire to negative wire.

How to connect the LED 12VoltDC Floodlight unit to our regulated 120VoltAC-to-12VoltDC power transformer

Red and Black wires exit from the GDL002 Floodlight unit.
The RED wire is Positive (+) and BLACK wire is the Negative (-) lead

To connect the GDL002 12-Volt DC Floodlight unit to a LEDtronics 120VoltAC-to-12VoltDC power transformer, like LEDtronics Part PLT-1003-303:

  1. Use a female 2.1mm coax adaptor jack like LEDtronics' part ADPT-STP-002.
  2. Strip about quarter inch off the insulation from the red and black wire and then connect the RED and BLACK wires to the like color wires on the GDL002 12VoltDC LED Floodlight unit.
  3. Use either electrical tap or wire nuts to cover the exposed bare wire on each Positive (+) and BLACK (-) wire. Do not let the Positive (+) and BLACK (-) wire come in contact with each other, do not let the bare + and - wires touch each other.
  4. Plug the connector from the 120VoltAC-to-12VoltDC power transformer into the connector (ADPT-STP-001) adaptor that you connected to the GDL002 12VoltDC Floodlight unit.
  5. Plug the 120VoltAC-to-12VoltDC power transformer into a wall outlet, the GDL002 12VoltDC Floodlight unit should now light-up.

White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

12-VoltDC FloodLED™ Floodlight

  GDL002  
CLICK TO ORDERPART NO.
(DESCRIPTION)		PRICEMIN BUYInput Voltage, V
(typ)		Current (A)Power (W)Total
Lumens		Efficacy
lm/W		Maximum
Candela		Operating
Temperature		LED Emitting
Color		Color Temp.
(Kelvin)		Viewing
Angle‡‡
Call
800-579-4875
To ORDER		GDL002-200-XIW-014V
(Stock Only UDF)		Click For Volume Discount Thru Distributor12-14Vdc1.013 A14.1 W485 lm34.4542cd~-30°C to ~+50°C  Warm White3000K55°
Photometrics:
Brochure:
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
Call
800-579-4875
To ORDER		GDL002-200-SIW-014V
Click For Volume Discount Thru Distributor12/14Vdc~1.2 A~14 W~589 lm~42~1220cd~-30°C to ~+50°C  Warm White2800K to 3200K32°
Photometrics:
Brochure:
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
CLICK TO ORDERPART NO.
(DESCRIPTION)		PRICEMIN BUYInput Voltage, V
(typ)		Current (A)Power (W)Total
Lumens		Efficacy
lm/W		Maximum
Candela		Operating
Temperature		LED Emitting
Color		Color Temp.
(Kelvin)		Viewing
Angle‡‡
Call
800-579-4875
To ORDER		GDL002-200-TPW-014N
Click For Volume Discount Thru Distributor12-14Vdc~0.920 A~12 W~594 lm~49.5~2525cd~-30°C to ~+50°C  True White4800K to 5200K~15°
Brochure:
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
Call
800-579-4875
To ORDER		GDL002-200-TPW-014M
(14VDC,T.White,MB PND)		Click For Volume Discount Thru Distributor12-14Vdc~0.920 A~12 W~594 lm~49.5~1069cd~-30°C to ~+50°C  True White4800K to 5200K~40°
Brochure:
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
Call
800-579-4875
To ORDER		GDL002-200-TPW-014W
(14VDC,T.White PND )		Click For Volume Discount Thru Distributor12-14Vdc0.916 A12.8 W651 lm51261cd~-30°C to ~+50°C  True White4800K to 5200K105°
Photometrics:
Brochure:
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity

Power Adapting Accessories

    
Power Connectors, AC-to-DC Power Supplies, DC-to-DC Dimmer
Power Connectors
AC-to-DC Power Supplies
DC-to-DC Dimmer

All specifications and pricing subject to change without notice.