Part #: RPLH16-02-01-02Z47

LED Panel Indicators, On @>50Vdc, Relampable, 16mm (5/8") Mtg.Dia.


Features
  • Sale Item (Sale Terms & Conditions)
  • Zener diode prevents undesired premature LED illumination from trickle voltages.
  • For utility and power plant industrial control indicators.
  • Comparable to UL 508
  • NEMA 3, 4, 4X, 5, 6, 12
  • Fluted Lens
  • Solid-State: High-Shock- & High-Vibration-Resistant
  • Long Life: White LEDs Last up to 50,000 Hours; Colored LEDs up to 100,000 Hours of Continuous Operation
  • Optimized Circuitry: Power Factor Corrected for Maximum Efficiency
  • Wide Operating Temp. Relative Humidity: Rated for Operation in Non-Condensing Relative Humidities between 5% and 95%
  • Maximum panel thickness: 0.25" [6.35mm]
  • Minimum center-to-center spacing:
    Horizontal, 1.75" [44.4mm]
    Vertical, 2.00" [50.8mm]
  • 40+ Years LEDtronics Design & Manufacturing
  • 'Made in USA' option available for qualified volume orders. Contact the factory.

 

Choose Options:

Color Options
Voltage Options

Spec Sheets




Applications

  • For Apps Where Restricting Trace Voltages Below 50Vdc from Triggering LED Illumination Is a Necessity
  • Industrial Controls
  • Panel Mount Retrofit Applications
  • Visual Factory Controls
  • Signaling Solutions
  • Control Lighting

Specifications

 DescriptionTurn-on voltage, 50Vdc, Min.
 Color650nm, Ultra Red      
 LensRPLL16-CRF Clear Red
 Voltage (V)130Vdc/120Vac
 Power (Watts)1.82 W
 Current (Amps)0.014A
 Intensity (Candela)
 Lumens
 SCP (Spherical Candela)
 Viewing Angle
Electrical-Optical Characteristics (Ta = 25°C)  

Possible Options

    For volume orders and qualified applications
  • Other LED colors available
  • Other voltages available
  • Pilot Light Assembly Part Number Example:
    02 = (1-LED, 5mm); 06 = (4-LED, 5mm); 03 = (7-LED, 3mm)
    * Volts = Full voltage. Customer defines incoming voltage, lamp in holder is made to that voltage.
    This holder contains no current limiting resistor. (Example RPLH16-24-01-02 [24 Volt incoming source])
    ** = 48 & 130VDC use an internal series resistor to drop the voltage across the LED bulb to 28 Volts.

Caution

  • (Concerning single color panel holders only, not bicolor holders): RPLH holders and indicators do not have polarity markings since they all use bipolar LED bulbs which are not sensitive to polarity
  • Not for dimming

Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Contact Us

Send us an email

Call Us

Speak to a customer service representative

An error has occurred. This application may no longer respond until reloaded. Reload 🗙