LEDtronics FAQ

LEDtronics FAQ

Safety LED Products

Will your 3volt flashlight bulbs work in a 2-cell flashlight? Will your 3V PR style White LED bulb, part number: F303-0CW-3V work in a "MagLight" brand flashlight (2 cell = 3V)?

Are your LED Flashlights water resistant? I am the happy owner of a new 6-LED FlashLED light. Can you tell me what the water resistance rating of this light is?

General LED

LED Intensity Comparisons How do I compare the brightness of different LEDs?

Dimming LEDs Are discrete LEDs and LED clusters dimmable?

Convert Watts/Lumens to Candela How do you convert Watts to Candela?

Room Lighting Can I use LEDs to illuminate a room or warehouse?

LED Afterglow The LED continues to glow after the lamp is turned off.

PCBoard LED Lamps

How Many pins does a Tri-Level, Tri-Color LED have and how do I control the color output? I want a Tri-Level, Tri-Color LED with each LED being able to display three different colors: Red, Green, Yellow (Amber). How many pins are required to control each LED of this type?

Discrete LED Lamps

White LEDs, what can they illuminate? Can I use White LEDs to light up different color lenses?

Purple LEDs: I was wondering if there was anyway possible to make an LED glow purple?

LEDs and Lasers: What is the difference between LEDs and Lasers?

Is the silver paste bond used on both the anode and the cathode connections?

Medium Based LED Lamps

I am inquiring whether you make LED Clusters that would fit in a standard 110Volt AC lamp socket. I am interested in converting some of my home lighting.

LED taillights for motorcycles

Do you have an LED lamp to replace an Incandescent #2233 Aircraft bulb? 1) Incandescent #2233 is a S-8, 15mm SC Bayonet, 28V, 0.77Amps, Aircraft bulb, (770mA), 21mscd (21,000mcd at every angle in full spectrum white light). 2) A) What, if any, is LEDtronics LED lamp replacement series part number? B) How many LEDs are required to replace this lamp? C) What is the angle of illumination that LEDs need to be? D) What color of LEDs is required?

Rail Road LEDs

We are trying to use the BR631-0CW-028M 28V-BP TM in a Railway application, powered via a multipair cable. The problem we discovered is that in the cable we have pairs caring either 110VAC 60Hz or|and 600VAC 4Hz. Connecting the BR631 to a pair of wires in the cable, the LED will flicker at the 600VAC EMI and light steady, dimmed at the 110VAC. We are looking to have an EMI shield or installation scheme to eliminate this EMI. Can you help?

Associations

Designing & Developing
LED Products in The USA Since 1983

About LEDtronics Video

Tools

LEDtronics, Inc.

Site Map Privacy Policy Warranty Contact Us LED News

23105 Kashiwa Ct, Torrance, CA 90505 - PH: (800) 579-4875/(310) 534-1505 - FAX: (310) 534-1424

All images and pictures and text on our website is Copyrighted property of LEDtronics.
No-one is authorized to use our pictures, images, catalogs or text without our explicit written approval.
Copyright © 1997-2013 LEDtronics, Inc., All Rights Reserved.