Home > LED Street Lights > LED Street, Area Parking Lot Light, Solar Applications > LED Street & Area Light, Slim Line, Solar Applications

LED Street & Area Light, Slim Line, Solar Applications


Only 19 Watts Replaces 70W MH, 10Vdc to 30Vdc Low Voltage


Standard Type III Illumination Pattern. Available Narrow, Medium or Wide Beams

Ideal for Alternative Energy Resources like Solar Power, Wind Power

Major Energy Reduction. Reduces Light Pollution. Enhances Night Vision
 
Meets Buy American requirements within the ARRA
American Reinvestment and Recovery Act
   
  • Products on this page are
    Made In USA
    from imported parts
  • ISO 9001
  • INSTALL INSTRUCTIONS
  •  Free Samples Are
    Not Available
  • Five Year Warranty
  • Major Energy Savings. Night Vision Friendly
  • Solid-State, High Shock / Vibration Resistant
  • Conforms to IESNA Standards
  • Long Life: Lumen Maintenance of the White LEDs Is Greater than 70% at 35,000 Hours of Operation.
    (Rated Average Life Based on Engineering Testing and Probability Analysis)
  • Mounts on Industry Standard Lamp Posts
  • Weighs only 18.65lbs. as Compared to 39-42lbs for Non-LED
  • Conforms to IESNA Standards
  • Very Low Power Consumption, Super Intensity
  • Reduces Light Pollution
  • "Instant On" with no delay in re-strike
  • Ambient Operating Temperature Range: ~-22°F to ~+122°F [~-30°C to ~+50°C]
For qualified applications and large quantity orders:
  • Options Available for Flush Ceiling Mount or Wall Mount
  • Other Voltages Available: 120VAC, 230VAC
  • Other Colors Available: Cool White, Amber, Yellow, Red, Green, Blue, Infrareds, Ultraviolet
  • Other LED Beam Angles for different effects
  • Housing: Made from aluminum construction with all stainless steel hardware, with an electrocoat painted finish.
  • Lens: Made from clear high-impact-strength polycarbonate, UV stabilized to prevent fading and yellowing. Lens is sealed with a neoprene gasket to protect all internal components from any moisture.
  • Fixture: Is intended for indoor or outdoor use and designed to protect against windblown dust, rain, splashing and direct hose “washdowns”.
Roadway Illumination Guideline
Classification I.E.S. Lighting Standard
Street Area Average
Illuminance
(Footcandles)		 Illuminance
Uniformity
Major Commercial 1.20 3.0 to 1
Intermediate 0.90 3.0 to 1
Residential 0.60 3.5 to 1
Collector Commercial 0.80 3.0 to 1
Intermediate 0.60 3.5 to 1
Residential 0.40 4.0 to 1
Local Commercial 0.60 6.0 to 1
Intermediate 0.50 6.0 to 1
Residential 0.30 6.0 to 1
Parking Lot Open Space 0.5 - 2.0 4:1
    Notes:
    1. Source: Illumination Engineering Society of North America, "Lighting Handbook", 8th Edition, 1993.
    2. Footcandle is the amount of direct light thrown by one candle on a square foot surface, every part of which is one foot away from the candle.
    3. Illuminance uniformity ratio is the average illuminance of the roadway design area between two adjacent divided by the lowest value at any point in the area.

Design Patent US D542,958 S

White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

10–30VoltDC Slim Line Streetlight Luminaire

  SLL003  
CLICK TO ORDERPART NO.
(DESCRIPTION)		PRICEMIN BUYInput Voltage, V
(typ)		Power (W)Total
Lumens		Efficacy
lm/W		Maximum
Candela		Illumination
Pattern		CRIColor Temp.
(Kelvin)		LED Emitting
Color		Operating
Temperature		Viewing
Angle‡‡
Call
800-579-4875
To ORDER		SLL003-400-TPW-014M3
(10-30Vdc,P.White,Type3)		Click For Volume Discount Thru Distributor10–30Vdc~19 W~1688 lmest. 89~2280cdType III (Asymm)70~734800K to 5200K  True White~-30°C to ~+50°C~40°x80°
Brochure:Brochure 
  Electrical / Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity

All specifications and pricing subject to change without notice.